WAP371-E-K9-EU

IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Internal antennas optimized for installation on a wall or ceiling
Antenna gain 2 dBi each antenna
802.11ac, 3x3 multiple-input multiple-output (MIMO) with 3 spatial streams at 5 GHz
802.11n 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams at 2.4 GHz

Dual concurrent radios (2.4 and 5 GHz)
Dual radio, orthogonal frequency division multiplexing (OFDM)

256 MB RAM
128 MB flash

Power, WLAN, LAN

1 x 10/100/1000 BASE-T autosensing (RJ45) with support for 802.3af/at PoE

Reset button

802.11a/b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
802.11n: 6.5 to 450 Mbps
- 20-MHz bandwidth: MCS 0-15 for supported data rates
- 40-MHz bandwidth: MCS 0-15 for supported data rates
802.11ac: 6.5 to 1300 Mbps
- 20-MHz bandwidth: MCS 0-9 for supported data rates
- 40-MHz bandwidth: MCS 0-9 for supported data rates
- 80-MHz bandwidth: MCS 0-9 for supported data rates

Access control : Yes, management access control list (ACL) plus MAC ACL
Secure management : HTTPS
SSID broadcast : Yes
Rogue access point detection : Yes

WPA/WPA2 including Enterprise authentication

Wireless throughput : Up to 950-Mbps data rate (real-world throughput will vary)

802.3at/af Ethernet switch

IEEE 802.3at Ethernet switch
Cisco power injector : SB-PWR-INJ2-xx (จำหน่ายเเยก)
AC adapter : SB-PWR-12V2A-xx (จำหน่ายเเยก)

Peak power : 17W

Operating temperature : 0° to 40°C (32° to 104°F)
Storage temperature : -20° to 70°C (-4° to 158°F)

Operating humidity : 10% to 85% noncondensing
Storage humidity : 5% to 90% noncondensing

Cisco WAP371 Wireless-AC/N Dual Radio Access Point
Ceiling/wall mounting kit
User guide on CD-ROM
Quick-start guide
Ethernet network cable

Access point mode, Wireless Domain Services bridging, client bridge mode

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Remote management
Event logging : Local, remote syslog, email alerts

SSID broadcast
Multiple SSIDs : 16

Up to 64 connective users, 30 active users per radio

Mounting bracket included for easy ceiling or wall mounting

Minimum Requirements :
Switch/router with PoE support, PoE injector, or AC power adapter
Web-based configuration: Java-enabled web browser